Adjusting The Led Color (Calibration Function); Adjusting The Brightness Of The Channel Name Display - Yamaha QL5 Reference Manual

Adjusting the LED color (Calibration function)

If necessary, you can adjust the LED colors. Adjust the LED colors one by one.
STEP
1. While holding down the [SEL] key for Fader B in the MASTER section on the panel,
turn on the power to the QL unit.
2. On the startup menu screen, press the LED COLOR CALIBRATION button.
3. Press a [SEL] key on the top panel to select the indicator for which you want to adjust
the channel color.
If you want to adjust the indicator color of the [TOUCH AND TURN] knob, press the
TOUCH AND TURN button in the LED field.
4. Press one of the color buttons in the COLOR field to select the desired color.
5. While comparing the color of the selected channel's indicator with the color of the
other channel indicators (for which the [SEL] keys are turned off), adjust the color
by using the [TOUCH AND TURN] knob to operate the RGB knobs in the RPG
ADJUSTMENT field.
6. When you have finished adjusting the color, press the APPLY button located in the
right of the screen to confirm the change.
7. Press the EXIT button on the startup menu screen to start up the QL unit in normal
operating mode.
LED COLOR CALIBRATION MODE
screen
NOTE
• In the case of QL1, channels that do not exist on the model will not be
shown.
• You cannot adjust more than one channel simultaneously.
• The APPLY button appears only if you change the RGB values.
• To reset all LED color indicators to the factory default setting, press the
RESET ALL button.
• Once initialization is complete, you can continue operation by selecting a
different menu instead of pressing the EXIT button.
LED field
240
Adjusting the brightness of the channel name
display
If necessary, you can adjust the brightness of the channel name display.
STEP
1. While holding down the [SEL] key for Fader B in the MASTER section on the panel,
turn on the power to the QL unit.
2. On the startup menu screen, press the LED COLOR CALIBRATION button.
3. Press the [CUE] key or [ON] key of the channel whose brightness you want to adjust.
Pressing the [CUE] key will increase the brightness, and pressing the [ON] key will
decrease the brightness.
4. When you have finished adjusting the brightness, press the APPLY button located in
the right of the screen to confirm the change.
5. Press the EXIT button on the startup menu screen to start up the QL unit in normal
operating mode.
NOTE
Alternatively, you can continue operation by selecting a different menu instead of pressing the
EXIT button.
Other functions
Reference Manual