Advertisement
STEP 3
9
A.) Place the Seat (#13) onto the Center Support Frame (#1). Secure it to the two
L-shaped Brackets (#12) with two M8 x 15mm Bolts (#23) and M8 Washers
(#30). Secure the Seat to the Center Support Frame with one M8 x 45mm Bolt
(#21) and M8 Washer (#30).
B.) Place the Backrest Board (#14) onto the Backrest Supports (#6). Secure it with
four M8 x 45mm Bolts (#21) and M8 Washers (#30).
C.) Attach the Cross Tube (#9) to the Front Vertical Frame (#3). Use a Knob (#38)
to secure the Tube at selected hole. Push two Foam Rolls (#15) onto the Cross
Tube.
D.) Insert the Foam Tube (#8) halfway through the hole on the Front Vertical Frame
(#3). Push two Foam Rolls (#15) onto the Tube.
E.) Lubricate the inside of the Foam Grips (#16) with water. Slide the Foam Grips
onto the Foam Tube (#8) from both sides.
3
15
36
13
12
1
12
30
23
30
23
8
30
21
15
38
14
6
6
30
21
16
36
30
21
Advertisement
