Store A Number In One-Touch - AT&T 993 2-Line User Manual

ONE TOUCH
PROGRAM
PROGRAM
234 - 567
WAIT
LOWER MEMORY
234- 567
Has been stored
One-touch operation (speed dial)
One-touch (speed dial)

Store a number in one-touch

. Press ENTER to enter the feature menu. The screen
displays ONE TOUCH.
Press ENTER. The screen displays PROGRAM.
2.
Press ENTER. The cursor flashes on the screen.
3.
4. Enter the phone number using the dial pad keys.
— OR —
Press (AUTO) REDIAL to copy the last number dialed
from this telephone to this one-touch location.
The screen will show the number as you enter it. The
first 6 characters appear on the second line and
the next eight on the third line. You can press
backspace and delete previous characters, or
move ahead and add one space. Each space counts as
one digit and appears on screen as -.
5. When finished entering the number, choose a one-touch
location:
Press the desired one-touch key. The screen displays
the number entered and stored.
— OR —
Press LOWER, then press the desired one-touch key.
The screen displays LOWER MEMORY, the number you
entered, and Has been stored.
NOTES:
. While programming one-touch entry, press
screen shows EXIT PROGRAM, then press ENTER to return to the
previous menu.
— OR —
Press and hold ENTER to return to idle mode.
2. You can store up to 24 digits in each one-touch location. If you try
to store more than 24 digits, the screen will briefly display Only 24
digits are allowed, and a low pitch (error) tone will sound.
39
to
to
repeatedly until the