Turn New Call Light Off - AT&T 993 2-Line User Manual

VOICE MESSAGES
L LIGHT OFF
VOICE MESSAGES
L2 LIGHT OFF
Telephone operation
Feature setup

Turn NEW CALL light off

If a NEW CALL light continues to flash when there are
no messages on that line, you may have received a false
signal from your telephone service provider. You can turn
off the light manually.
Press ENTER to begin feature setup.
.
2. Press until the screen displays VOICE MESSAGE.
3. Press ENTER. The screen displays L1 COVM ON/OFF.
4. Press until the screen displays L1 LIGHT OFF.
Press ENTER to turn the light off for that line. The
5.
screen displays L2 LIGHT OFF.
6. Repeat Step 5 to turn the light off for the other line.
— OR —
Press and hold ENTER to return to the idle screen.
NOTES:
This feature only turns off a NEW CALL light; it does not delete the
.
voicemail message(s). Use this feature when the telephone indicates
there is voicemail when you have none, or you have accessed your
voicemail from a different telephone line (while away from home). If
there actually is a new voicemail message, your telephone service
provider will continue to send the signal which makes a NEW CALL
light flash.
2. The telephone service provider voicemail may alert you to new
messages with a stutter (broken) dial tone. Contact your telephone
service provider for more details.
25