Set Call History; Choose How To Store Repeat Calls In Call History - AT&T 993 2-Line User Manual

FEATURE SETUP
CALLER ID
CALLER ID
All Calls
CALL HISTORY
FEATURE SETUP
CALLER ID
CALLER ID
Combined
REPEAT CALLS
Telephone operation
Feature setup

Set call history

You can choose whether or not to store calls in call
history.
Press ENTER to begin feature setup.
.
2. Press until the screen displays CALLER ID.
3. Press ENTER. The screen displays AREA CODES.
4. Press until the screen displays CALL HISTORY and
the current setting.
5. Press or
6. When the correct setting is shown, press
to save your choice. There is a high pitch tone to
indicate confirmation and the screen displays REPEAT
CALLS.
7. Proceed to step 5 below to set the next feature
(Repeat calls).
— OR —
Press and hold ENTER to return to the idle screen.

Choose how to store repeat calls in call history

You can choose how new calls from the same number
are displayed. Choose Combined to show only the most
recent call from the number. Select Separate to display
each call individually.
. Press ENTER to begin feature setup.
2. Press until the screen displays CALLER ID.
Press ENTER. The screen displays AREA CODES.
3.
until the screen displays REPEAT CALLS and
4. Press
the current setting.
5. Press or
Separate.
6. When the correct setting is shown, press
ENTER to save your choice. The screen displays CID-
CALL WAIT.
7. Proceed to Step 5 of Turn caller ID with call waiting
on or off on page 29 to set the next feature (Caller ID
with call waiting).
— OR —
Press and hold ENTER to return to the idle screen.
to select between All Calls and No Calls.
to select between Combined and
28
or ENTER
or press