Page 1
USER’S MANUAL Part 2 Two-Line Speakerphone 952 Fold open this manual for information about this telephone’s installation and operation. Please also read Part 1 — Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones.
I N S T A L L A T I O N Before You Install NOTE: To use this product as a two-line phone, you must have a two-line modular jack or two separate one-line modular jacks. To use both lines of a two-line telephone, your local telephone company must provide two telephone numbers.
I N S T A L L A T I O N Table/Desk Connect line cord(s) to telephone. • If you have a two-line jack, use only the line cord with the clear modular plugs on each end. Plug one end into the jack labeled L1 OR L1/L2 on the back of the telephone.
Page 4
I N S T A L L A T I O N Wall Connect bundled line cord(s) to the telephone. Leave the telephone line cord(s) bundled. If you have a two-line wall jack, use only • the line cord with the clear modular plugs on each end.
T E L E P H O N E O P E R A T I O N Red flashing: line on hold Green flashing: line ringing Flash Press F instead of pressing the switchhook to activate services such as Call Waiting or 3-Way Calling.
T E L E P H O N E O P E R A T I O N Automatic Redial This phone can automatically and repeatedly redial the last number you called. Press L or l, then press a without lifting the handset or pressing K or h.
T E L E P H O N E M E M O R Y Storing Memory Numbers 1 Lift the handset. 2 Press and release P. 3 Enter the telephone number you want to store (up to 24 digits) or press a to store the last number dialed.You will hear a beep each time you...
I N C A S E O F D I F F I C U L T Y If you have difficulty operating this phone, try the suggestions below. For Customer Service, visit our website at www.telephones.att.com or call 1 800 222–3111. Please retain your receipt as your proof of purchase.