Heat & Glo ST-36TRB-IPI Owner's Manual page 63

2 2
F F igure 5. Placement of Log #2 igure 5. Placement of Log #2
STEP 3. Log #2 (SRV2128-705):
come in contact with the second grate tine from the left. Mate the bottom of log # 2 with the notches on top of log B and the
smooth area on top of the end of log C.
INDENTATIONS INDENTATIONS
F igure 7. Placement of Log #3 F igure 7. Placement of Log #3
STEP 4. Log #3 (SRV2128-707):
the bottom of log # 3 with the indentations on Log D and the top of Log #2.
Heat & Glo • ST-36TRB-IPI, PIER-36TRB-IPI, LCOR-36TRB-IPI, RCOR-36TRB-IPI • 2128-900 Rev. R • 12/15
The Y-shaped end of log #2 should rest on log B and log C. The other end should
3 3
2 2
The bottom end of log #3 should come in contact with the far left grate tine. Mate
GRATE TINES GRATE TINES
B B
2 2
D D
Figure 6. Placement of Log #2 Figure 6. Placement of Log #2
GRATE TINES GRATE TINES
B B 3 3
2 2
D D
Figure 8. Placement of Log #3 Figure 8. Placement of Log #3
1 1
C C
A A
1 1
PILOT PILOT
C C
A A
63