Table of Contents
Advertisement
c WARNING indicator
Lights up or flashes when an abnormality occurs
in the VTR section.
For details about the meaning of the states of the
WARNING indicator, see ""Operation Warnings"
on page 154.
d TAPE indicator
This lights when a cassette is loaded.
e Protection cover of the audio control/
timecode operations sections
Open to access the audio control section and the
timecode operation section.
For details, see "Timecode/menu operations section
and audio control section" on page 20.
f Protection cover of the timecode/menu
operations section
Open to access the buttons and switches used for
setting timecode and user bit values and
performing menu operations.
For details, see "Timecode/menu operations section
and audio control section" on page 20.
g Monochrome LCD
This shows the remaining battery capacity,
remaining tape recording time, time data, and so
on.
For details, see "Status displays on the LCD monitor
and monochrome LCD" on page 17.
h EJECT button
Press this button to eject or load a cassette.
i REW (rewind) button and indicator
Press this button to rewind the tape. The indicator
lights during rewinding.
j F FWD (fast forward) button and
indicator
Press this button to fast forward the tape. The
indicator lights during fast forward.
k STOP button
Press this button to stop the tape.
l PLAY button and indicator
Press this button to view the recorded picture in
the viewfinder or on the color video monitor. The
indicator lights during playback. The four times
normal speed search function is provided to make
16
Locations and Functions of Parts and Controls
it far quicker to find a desired location of the tape.
Press the REW button or F FWD button during
playback to view the four times normal speed
search picture.
m DISP SEL (display selection) button
With each press of this button, the display in the
LCD monitor changes as follows.
Display indication
Meaning
Video with
The LCD monitor displays
superimposed
the same text information
information (CHAR)
as the viewfinder.
Video without
The video only appears.
superimposed
information (MONI)
Status display
Counter indications,
(STATUS)
warnings, audio levels, and
similar information appear.
No video image appears.
n HOLD (display hold) button
Pressing this button instantly freezes the time data
displayed in the counter display section. (The
timecode generator continues running.) Pressing
this button again releases the hold.
You can use this button, for example, to
determine the exact time of a particular shot.
For details of the counter display, see page 18.
o RESET button
Resets the value shown in the time counter
display. According to the settings of the PRESET/
REGEN/CLOCK switch (see page 20), the F-
RUN/SET/R-RUN switch (see page 20), and the
DATA DISPLAY switch (see page 20), this
button resets the display as follows.
Advertisement
Table of Contents
