Editing The User Menu - Sony HDW-650 Operation Manual

3
Press the MENU knob.
b and z appear.
U05 REC FUNCTION
DF/NDF
END SEARCH
CACHE/INTVAL REC:
4
Turn the MENU knob to move b to the
desired item, and then press the MENU
knob.
b changes to z, and z changes to ?.
5
Turn the MENU knob to change the
setting.
Depending on the direction of turning the
knob, the setting value increases, decreases,
switches between ON and OFF, and so on.
To interrupt changing the settings
Set the MENU ON/OFF switch to OFF.
By setting the MENU ON/OFF switch to ON
again, the values that were displayed when
you interrupted the setting operations will
reappear so you can continue making
settings.
6
Press the MENU knob.
z changes to b, and ? changes to z. The
selection is confirmed.
7
To continue setting other items on the
same page, repeat steps from 4 to 6.
8
To end the menu operation, set the
MENU ON/OFF switch to OFF.
The menu disappears from the screen, and
the display indicating the current status of the
camcorder appears along the top and bottom
of the screen.
To cancel a change or return to the
standard settings
Note
Depending on the setting item, in some cases only the
function to return to the standard setting is valid.
1
Before pressing the MENU knob in step
6 of the above procedure, flick the
TOP
: DF
2
: OFF
OFF
3
4
To move to another page
?U05 REC FUNCTION
DF/NDF
END SEARCH
CACHE/INTVAL REC:
When ? appears in front of the page number
Turn the MENU knob to switch pages.
When nothing appears in front of the page
number
Turn the MENU knob to move b to the page
number, and press the MENU knob. Then turn the
MENU knob to switch pages.

Editing the USER menu

The USER MENU CUSTOMIZE menu allows
you to configure a USER menu that consists only
of pages and items that you need by adding,
deleting or replacing the pages.
CANCEL/PRST/ESCAPE switch to the
CANCEL/PRST position.
The message "CANCEL DATA OK?"
appears.
Flick the CANCEL/PRST/ESCAPE
switch to the CANCEL/PRST position
again.
The message "CANCEL DATA" appears to
indicate that the change has been cancelled.
To return to the standard settings after
pressing the MENU knob in step 6 of
the above procedure, flick the
CANCEL/PRST/ESCAPE switch to the
CANCEL/PRST position.
The message "PRESET DATA OK?"
appears on the screen.
Flick the CANCEL/PRST/ESCAPE
switch to the CANCEL/PRST position
again.
This returns to the standard settings.
:
:
TOP
DF
OFF
OFF
Menu Operations 119