Setting The Marker Display - Sony HDW-650 Operation Manual

3 Repeat steps 1 and 2 to set the
remaining items.
The conditions under which the indicator
lights can be changed on the '!' LED STD
page.
To change the conditions, continue to step 3.
3
Display the '!' LED STD page.
O12 '!' LED STD
GAIN
SHUTTER
WHITE BAL
CC 5600K
ATW RUN
EXTENDER
FILTER ND
FILTER CC
OVERRIDE
Item
GAIN
SHUTTER
WHITE BAL White balance automatic
CC 5600K
ATW RUN
EXTENDER
FILTER ND
FILTER CC
OVERRIDE
4
Set the various items.
1 Select the item to set and press the
MENU knob.
2 Select the desired setting and press the
MENU knob.
3 Repeat steps 1 and 2 to set the
remaining items.
To make '!' LED page settings only
The '!' LED page is registered in the USER menu
as well as the OPERATION menu. You can
display the '!' LED page from the USER menu
without needing to display the TOP menu.
126 Setting the Status Display on the Viewfinder Screen and the LCD Monitor
TOP
<!> : 0dB
<!> : OFF
<!> : AB
<!> : OFF
<!> : OFF
<!> : OFF
<!> : 1
<!> : B
<!> : OFF
Description
GAIN switch position L, M,
H, or 0 dB
Shutter modes, OFF, or ECS
adjustment memory, P
(PRST), A, B, PA, PB, or AB
CC 5600K mode ON or OFF
ATW ON or OFF
Extender ON or OFF
Types of the ND filter, 1, 2, 3,
or 4
Types of the CC filter, A, B,
C, or D
ON or OFF when the
reference value of the auto iris
adjustment is other than the
standard value

Setting the marker display

Switch the display of the center and safety zone
markers on or off, and select whether the area
indicated by the safety zone marker is 80%, 90%,
92.5%, or 95% of the screen area.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the MARKER 1 or MARKER 2
page of the OPERATION menu on the
screen, and press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 113.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
MARKER 1 and MARKER 2 pages.
MARKER 1 page
Item Description
MARKER To hide all markers, set to
OFF.
CENTER To display the center marker,
set to ON.
CENTER Selects the position of the
MARK center marker.
SAFETY To display the safety zone, set
ZONE to ON.
SAFETY Selects the safety zone range
AREA (80%, 90%, 92.5% or 95%).
ASPECT To display the aspect marker,
set to ON.
ASPECT Selects the aspect mode (15:9/
SELECT 14:9/13:9/4:3/1.85/2.35).
ASPECT To make the areas out of the
a) selected aspect marker
MASK
dimmer, set to ON.
ASPECT To set the mask level, when
MASK LVL the ASPECT MASK is set to
ON.
100 % To display the effective pixel
MARKER area, set to ON.
a) The ASPECT MASK setting affects the
viewfinder and LCD monitor display. In the
following cases, it also affects the VBS signal or
the HD/SD SDI signal.
• When HD/SD SDI OUT on the OUTPUT 1
page is set to HDSDI or SDSDI, and HD/SD
SDI SUPER is to ON, and SUPER