Table of Contents
Advertisement
No. Page
Item
12 CAM
TEST SAW SELECT
CONFIG 2
COLOR BAR SELECT ARIB/100%/
USER & ALL ONLY
RM COMMON
MEMORY
RM REC START
HDSDI REMOTE I/F
SHT DISP MODE
FAN CONTROL
Settings
Description
SAW/REC
Selects the test signal.
Selects the HD color bar type.
75%/SMPTE
OFF/ON
Show only USER menu in the top menu.
OFF/ON
Selects whether or not to share settings for
when a remote control unit is connected and
when the unit is used alone.
RM/CAM/PARA When an RM remote control unit is
connected, selects which recording start/stop
buttons are enabled.
RM: remote control unit
CAM: camera
PARA: both
OFF/CHARA/
Selects whether to use the function that
G-TLY/R-TLY
enables recording control from this unit of an
external device connected to the HDSDI OUT
connector of this unit.
indication that shows whether the external
device is recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by
the controlling external device indicator
in the viewfinder (see page 26).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the
REC (recording, red tally) indicator in
the viewfinder.
Note
When R-TLY is selected, the REC indicator lights
even when the unit is not recording.
SEC/DEG
Selects shutter speed display (seconds or
degrees).
AUTO/MANU/
Specifies the fan control method.
OFF
AUTO: Normal fan control
OFF: Forcibly stop the fan.
MANU: Forcibly stop the fan while the unit
is recording.
Note
Temperatures rise within the unit when the fan is
forcibly stopped, so it should not be stopped for
extended periods. Forcible stopping of the fan is
cancelled if temperatures rise to abnormal levels
within the unit. If the unit is powered off while
this item is set to MANU or OFF, the setting is
changed to AUTO when the unit is powered on
again.
e)
Also selects the
Menu List
105
Advertisement
Table of Contents
