Disassembly Flowchart; Main Unit; Display Unit - Panasonic CF-Y4 Service Manual

2 Disassembly & Reassembly Instructions
2.1.

Disassembly Flowchart

· The chart below shows the various parts which should be removed in order to remove the parts that are to be replaced.
· Parts can be replaced efficiently by following the disassembly steps in the chart.

Main Unit

Main Unit
2.2.1
Preparations
1. End the Windows.
2. Turn off the Power and, then remove the AC Adaptor or Battery Pack.
3. Remove any optional DIMM Memory Cards or PCMCIA Cards.
4. Remove any other peripherals or Connected Devices.
2.2.2
2.2.3
2.2.4
2.2.5
HDD
2.2.6 2.2.7
Open SW
MDC
&
Modem Board
Jack Board

Display Unit

Keyboard Ass'y
Bottom Case Ass'y
LCD Block
2.2.9
DVD-ROM & CD-R/RW Drive /
Power SW Board
2.2.8 2.2.11
FPC
Latch Knob
(PAD-HDD-MAIN)/
Touch Pad
Disassembly in LCD Block
2.2.14
LCD Front Ass'y/
Hinge(L), (R)
2.2.15
2.2.16
Inverter Board
2.2.10
Main Board /
Wireless LAN Module
2.2.12 2.2.13
Antenna Board Speaker
(L), (R) (L), (R)
LCD Unit
2-1
Main replaceable parts
2.2.1
AC Adapter
Battery Pack
DIMM Cover Ass'y
2.2.2 Keyboard Ass'y
2.2.3 Bottom Case Ass'y
Side Covers (L), (R)
2.2.4 LCD Block
2.2.5
HDD
HDD FPC Unit
HDD Case
2.2.6 MDC Modem
2.2.7
Open SW & Jack Board
Power Knob
Jack & HDD Angle
2.2.8 Latch Knob
Latch Spring
2.2.9 DVD-ROM & CD-R/RW Drive
Disk Knob
Disk Knob Spring
Disk Cover Lock Angle
FPC (Drive)
Power SW Board
2.2.10 Main Board
Wireless LAN Module
Card Bus Ejector
DC-IN Jack
2.2.11 FPC (PAD-HDD-MAIN)
Touch Pad
Pad Ring
Pad Button
2.2.12 Antenna Board (L), (R)
Antenna Cable (L), (R)
2.2.13 Speaker (L), (R)
2.2.14 LCD Front Ass'y
Hinge Cover (L), (R)
Hinge (L), (R)
2.2.15 LCD Unit
LCD Rear Cabinet
LCD Rear Cover
LCD Cable/
Inverter Cable
2.2.16 Inverter Board