Panasonic CF-Y4 Service Manual page 13

2.2.8. Removing the Latch Knob
· Preparation: Make sure that the steps in sections 2.2.1
to 2.2.5 have been taken first.
1. Remove the LCD Knob Spring.
2. Remove the Screw (X), and remove the Latch Knob from
the Top Case Ass'y.
Screw (X): DXHM0064ZA
Latch Spring
Screw (X)
Latch Knob
2-5
2.2.9. Removing the DVD-ROM & CD-
R/RW Drive and Power SW
· Preparation: Make sure that the steps in sections 2.2.1
to 2.2.4 have been taken first.
1. Remove the Spring for Disk Knob.
2. Remove the Disk Cover Lock Angle.
3. Disconnect the FPC (DVD-ROM & CD-R/RW Drive) from
the connector (CN920).
4. Disconnect the FPC (DVD-ROM & CD-R/RW Drive) from
the connector (CN4).
5. Peel off the Conductive Cloth from the Top Case Ass'y.
6. Remove the two Screws (N) and Screw (P), and remove the
CD/DVD Drive.
Screw (N): DXHM0057ZA
Screw (P): DXHM0064ZA
Conductive Cloth
Screw (P)
Power SW & DVD FPC
CN920
Disk Cover Lock Angle
* The Conductive Cloth cannot be re-used.
Use a new one instead.
7. Remove the Screw (Q), and remove the Drive/Open Board.
Screw (Q): DXHM0056ZA
CN920
Power SW Board
SW920
Top Case Ass'y
Drive Knob
Screw (N)
CN4
Screw (N)
Spring for Disk Knob
Screw (Q)