Panasonic CF-Y4 Service Manual page 11

3. Operate the Open Button of the LCD Unit, and open the
LCD Block to an angle of 90 degrees or more.
4. Remove the Screws (E) and the six Hooks, and then
remove the Side Cover (R).
Screw (E): DRQT2+G6FKL
5. Remove the six Hooks, and remove the Side Cover (L).
Side Cover (L)
Hook
Hook
A
Screw (E)
Back side
Slot-head watch screwdriver
6. Remove the Disk Cover Shaft from the Disk Cover.
Disk Cover Ass'y
Top Case Ass'y
Disk Cover Shaft
LCD Block
Hook
Side Cover (R)
10. Remove the two Screws (H) and two Screws (J) of the LCD
2-3
7. Remove the nine Screws (F) of the Top Case Ass'y.
Screw (F): DRQT2+G6FKL
Screw (F)
Screw (F)
8. Set the Main Unit upright with its DVD-ROM & CD-R/RW
Drive side facing down.
9. Remove the two Hexagonal-head Screws (G) of the VGA
connector.
Hexagonal-head Screw (G): DFHE5035ZB
Block, and then remove the Bottom Case Ass'y.
Screw (H): XTB26+10GFN
Screw (J): DXYN3+J5FNL
Hexagonal-head
Screw (G)
Screw (H)
Screw (J)
Screw (H)
Screw (J)
Screw (F)
Bottom Case Ass'y