OptioWG1_eng.book Page 305 Friday, March 11, 2011 4:10 PM
Using the GPS
Recording GPS data onto images
You can record GPS data (latitude, longitude, altitude, or date etc.) onto
images you take. To record them, set [GPS Setting] to O (On).
Set [GPS Setting] to O (On) before setting [Logging] (p.306) and [Auto Time
Synch.] (p.308) settings.
1
Press the 3 button in Q mode.
[W Setting] menu appears.
When you press the 3 button in A mode, press the four-way
controller (5) once.
2
Use the four-way controller (23) to select [GPS].
3
Press the four-way controller (5).
[GPS] screen appears.
4
Use the four-way controller (23) to select [GPS Setting].
5
Use the four-way controller (45)
to switch between O (On) or P
(Off).
O(On)
P (Off)
6
Press the 3 button twice.
The camera returns to A mode or Q mode.
• Only when
information can be recorded onto images.
• If [GPS Setting] is set to O (On), the camera performs positioning
regularly even if it is turned off, which reduces the battery life.
Records GPS information
onto images
Does not record GPS
information onto images
is displayed on the capture mode screen, the GPS
GPS
GPS
GPS
This part applies only to Optio WG-1 GPS camera
GPS
GPS Setting
Logging
Off
Auto Time Synch.
Off
MENU
9
305