Assembly Procedure; Power Section; List; Disassembly Procedure - Sharp AL-2020 Service Manual

11) Disconnect the connector.
12) Remove the three screws, and remove the NIC PWB unit.
(AL-2040/2050/2060)
13) Disconnect the connectors.
14) Remove the five screws, and remove the MCU PWB. (The
shape of the MCU PWB differs depending on the model.)
1)
1)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
8

Power section

A. List
No. Part name Ref.
1 Power PWB
2)
3)
3)
1)
2)
1)
2)
3)
2)
1) 2)
1)
1)
2)
AL-2030/2040CS/2050CS DISASSEMBLY AND ASSEMBLY 8 - 18
B. Disassembly procedure
1) Disconnect each connector.
2) Remove the screw, and remove the earth line.
3) Remove two screws, and remove the power PWB unit.
4)
1)
1) 1)
2)
1)
3)
5)
4)
C. Assembly procedure
For assembly, reverse the disassembly procedure.

9. Duplex motor section

A. List
No. Part name Ref.
1 Duplex motor
B. Disassembly procedure
1) Remove the rear cabinet.
2) Remove two screws.
3) Remove the Duplex motor cover.
4) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motor
gear with the belt on the main body side.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
1)
3
2
1
1