Panasonic SA-BTT405P Service Manual page 45

13.2.2. How to register the MAC address of
13.2.2. How to write the Blue tooth MAC
Bluetooth module to NFC tag.
13.2.2. How to register the MAC address of
13.2.2. How to register the MAC address of
address to NFC module
Bluetooth module to NFC tag.
Bluetooth module to NFC tag.
13.2.2. How to register the MAC address of
1. Tap the "TCL BT TAG Writer" icon (
1. Tap the "TCL BT TAG Writer" icon (
Bluetooth module to NFC tag.
2. Select the BT module type (It is printed on the label
2. Confirm the Module type in the label on the Bluetooth
1. Tap the "TCL BT TAG Writer" icon (
1. Tap the "TCL BT TAG Writer" icon ( which is pasted on the Bluetooth module of Front P.C.B.
module of Front P.C.B. Unit, then select and tap the
2. Confirm the Module type in the label on the Bluetooth
Unit. (For example: BTM8630.) and tap it .
2. Confirm the Module type in the label on the Bluetooth
Module type. (Example:BTM8630)
module of Front P.C.B. Unit, then select and tap the
module of Front P.C.B. Unit, then select and tap the
1. Tap the "TCL BT TAG Writer" icon (
Module type. (Example:BTM8630)
Module type. (Example:BTM8630)
2. Confirm the Module type in the label on the Bluetooth
module of Front P.C.B. Unit, then select and tap the
Module type. (Example:BTM8630)
3. After selecting the module type, QR code Scan screen is
3. After selecting the module type, QR code Scan screen is
3. After selecting the module type, QR code Scan screen is displayed. Tap [Skip the scan.] to skip this screen.
displayed. Tap [Skip the scan.] to skip this screen.
displayed. Tap [Skip the scan.] to skip this screen.
3. After selecting the module type, QR code scan screen is
displayed. Tap [Skip the scan.] to skip this screen .
3. After selecting the module type, QR code Scan screen is
displayed. Tap [Skip the scan.] to skip this screen.
4. MAC Address and Device Name inputting screen appears.
Please input 6 digits numbers on the right of "40:ef:4c:" in
4. MAC Address and Device name input screen is
4. MAC Address and Device name input screen is
MAC ADDRESS column (the 6 digits numbers are printed
displayed. Read the specified part in the label
on the label which pasted on the Bluetooth module of
on the Bluetooth module of Front P.C.B. Unit,
) to execute.
Front P.C.B. and the ":"will appear automatically when
) to execute. enter it to the second half of [MAC ADDRESS] field.
you input.)
(" : " is filled in automatically)
) to execute.
DEVICE NAME will appear automatically, but you also
Next, delete the character that is entered in [DEVICE
) to execute.
can delete it and input "Panasonic BTT". (Once you do it
NAME] field, then enter "Panasonic BBT" to the field.
after Tag writer software has been installed, the default
(This operation required only once after the "TCL BT TAG
) to execute.
device name always displayed as "Panasonic BTT".)
Writer" software installation.)
5. Tap [Write to Tag], then move the NFC part of the Android
5. Tap [Write to Tag]. then move the NFC part of your Android
5. Tap [Write to Tag], then move the NFC part of the Android
device close to NFC antenna part of the NFC P.C.B. Unit.
device close to the NFC antenna part of NFC P.C.B. unit
6. Wait till [Tag written successfully!] is displayed, tag writing
and hold it until a beep sound is heard.which means the
6. Wait till [Tag written successfully!] is displayed, tag writing
is completed. Tap [Exit] to exit the "TCL BT TAG Writer"
Android device is recognized by the NFC module.
software.
6. When [Tag written successfully!] appears, Tap [Exit].
47
45
47
47
4. MAC Address and Device name input screen is
displayed. Read the specified part in the label
on the Bluetooth module of Front P.C.B. Unit,
enter it to the second half of [MAC ADDRESS] field.
displayed. Read the specified part in the label
(" : " is filled in automatically)
on the Bluetooth module of Front P.C.B. Unit,
4. MAC Address and Device name input screen is
Next, delete the character that is entered in [DEVICE
enter it to the second half of [MAC ADDRESS] field.
displayed. Read the specified part in the label
(" : " is filled in automatically) NAME] field, then enter "Panasonic BBT" to the field.
on the Bluetooth module of Front P.C.B. Unit,
Next, delete the character that is entered in [DEVICE
(This operation required only once after the "TCL BT TAG
enter it to the second half of [MAC ADDRESS] field.
NAME] field, then enter "Panasonic BBT" to the field.
Writer" software installation.)
(" : " is filled in automatically)
(This operation required only once after the "TCL BT TAG
Next, delete the character that is entered in [DEVICE
Writer" software installation.)
NAME] field, then enter "Panasonic BBT" to the field.
(This operation required only once after the "TCL BT TAG
Writer" software installation.)
5. Tap [Write to Tag], then move the NFC part of the Android
device close to NFC antenna part of the NFC P.C.B. Unit.
device close to NFC antenna part of the NFC P.C.B. Unit.
6. Wait till [Tag written successfully!] is displayed, tag writing
is completed. Tap [Exit] to exit the "TCL BT TAG Writer"
is completed. Tap [Exit] to exit the "TCL BT TAG Writer
software.
software.
5. Tap [Write to Tag], then move the NFC part of the Android
device close to NFC antenna part of the NFC P.C.B. Unit
6. Wait till [Tag written successfully!] is displayed, tag writing
is completed. Tap [Exit] to exit the "TCL BT TAG Writer
software.