After Servicing - Panasonic SA-BTT405P Service Manual

If your wireless network is encrypted;
Enter your encryption key (password).
≥ You can switch between capital and lower case
≥ Refer to the owner's manuals of the hub or router.
10.2.

After Servicing

letters by pressing the "Shift" key.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
Encryption Key (Password)
access.
l
≥ If you have trouble getting online on your PC after
After Service
performing network settings on this unit, perform the
Shift
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* SSID:
Updating
An SSID (Service Set IDentification) is a name used by
OK
RETURN
wireless LAN to identify a particular network.
deleting e
Transmission is possible if the SSID matches for both
devices.
≥ Refer to the owner's manuals of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
(*a)
personal or secret information.
Refer to P7 3.3
* SSID:
How to Update Firmware
An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network.
Transmission is possible if the SSID matches for both
devices.
(*b)
1.Power on.
2. Press [5][9] and [red] on remote control
simultaneously for more than 5 sec.
3.[70RET] appears on LED display.
4.Press [
[80RET] appears on LED display. [80RET] appears on LED display.
5. 5.
6.Press [OK] on remote control 6.Press [OK] on remote control
7 Wait for about 30 sec 7.Wait for about 30 sec.
14
VQT5F60
8.[SERV]] appears on LED display.
9.Press [9][9] on remote control .
10.Error code be delelted .
11.Press and hold [Power] on (remote control
About Circuit
or unit) and exit the service mode.
After Service
14
VQT5F60
Firmware
Updating (*a)and
rror code
deleting e (*b)
END
(*b)
1.Power on.
2. Press [5][9] and [red] on remote control
simultaneously for more than 5 sec.
3.[70RET] appears on LED display.
1 2 3 4 5 6 7 8 9 0
.
@
* #
~
/ : _ - , ; ` "
Space
Symbols Alphanumeric Other Characters
Firmware
(*a)and
rror code
(*b)
END
] on remote control .
http://panasonic.net/support/
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
(*a)
DO NOT DISCONNECT the unit from the AC
This unit is capable of checking the firmware
power or perform any operation while the update
Delete
automatically when connected to the Internet via
is in process.
Finish
a broadband connection.
After the firmware is installed, "FIn" will be
When a new firmware version is available, the
displayed on the unit's display. Unit will restart
following message is displayed.
and the following screen will be displayed.
New Version:
The firmware was updated.
Current Version: X.XX
Current Version
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
Yes
DO NOT DISCONNECT the unit from the AC
≥ If downloading on this unit fails or this unit is not
power or perform any operation while the update
connected to the Internet, then you can download the
is in process.
latest firmware from the following website and burn it
After the firmware is installed, "FIn" will be to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
displayed on the unit's display. Unit will restart
(This site is in English only.)
and the following screen will be displayed.
To show the firmware version on this unit. (
"Firmware Version Information")
The firmware was updated.
≥ Downloading will require several minutes. It may take Current Version
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
≥ If downloading on this unit fails or this unit is not
connected to the Internet, then you can download the
latest firmware from the following website and burn it
to a CD-R to update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (
"Firmware Version Information")
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥ If you do not want to check for the latest firmware version,
set "Automatic Update Check" to "Off". (
Start
Remove the Power
Cable and reInsert it
after 10 sec check the
Symptom?
No Symptom
23
Yes No
OK
RETURN
Start
Firmware Update
X.XX
: x.xx
Remove the Power
Cable and reInsert it
after 10 sec check the
No
RETURN
Symptom?
OK
RETURN
No Symptom
: x.xx
RETURN
32)
32,
32)
Refer to Other Symptom
(See next pages)
NG
Refer to Other Sympto
(See next pages)
NG
32,