Panasonic SA-BTT405P Service Manual page 35

4. Pull out the NFC P.C.B. Unit.
4. Pull out the NFC P.C.B. Unit..
12.3.4. Body Chassis
12.3.4. Body Chassis
1. Detach the lead wires fixed at hooking part of the Body
1.Detach the lead wires fixed at hooking part of the Body
Chassis.
Chassis.
2. Remove the 3 screws (A) and remove the Body Chassis.
2.Remove 3 Screws (A) to remove the Body Chassis
Screw (A)
Screw (A)
Hooking part
13.3.5. Power Supply P.C.B.Unit
1.Disconnect the connector (A) and connect (B).
2.Remove the 4 screws (A), then remove the Power Supply
12.3.5. Power Supply P.C.B. Unit
P.C.B. Unit.
1. Remove the connector (A) and (B).
2. Remove the 2 screws (A), then remove the Power Supply
P.C.B. Unit.
Screw (A)
Power Supply P.C.B.
37
35
Body Chassis
Screw (A)
Connector (A)
Connector (B)
Screw (A)