Telephone Operation; Making, Answering And Ending Calls; Making A Call; Temporary Ringer Silencing - AT&T EL52200 User Manual

Telephone operation

Making, answering and ending calls

making a call

To make a call:
1. Press PHonE/
-oR-
Press SPEAKER, to use the speakerphone, then wait
for the dial tone.
2. Use the dial pad keys to enter the telephone number.
on-hook dialing (predialing):
1. Use the dial pad keys to enter the telephone number
(up to 30 digits).
• Press and hold
dialing pause (a P appears).
• Press
mUTE
corrections.
2. Press PHonE/
-oR-
SPEAKER to call using the speakerphone.
Press
-oR-
Press and hold
notes:
• Pressing
PHonE
affect the elapsed time.
• When a handset is on a call, if another handset attempts to access the directory, speed dial
list or caller ID history, the screen shows noT AvAILABLE AT THIS TImE.

Temporary ringer silencing

To silence the ringer temporarily on that handset only:
• While the telephone is ringing, press
mUTE/
DELETE
To silence the ringer temporarily on the telephone base:
• While the telephone is ringing, press
telephone base.
This turns off the ringer without disconnecting the call. The next incoming
call rings normally at the preset volume.
note: Unless the ringer volume is turned off on that handset, each handset rings when
there is an incoming call.
, then wait for the dial tone.
FLASH
/PAUSE to insert a three-second
REDIAL
/DELETE or
to call.
FLASH
oFF/
CLEAR
/FLASH to access services from your telephone service provider does not
.
/CLEAR to make
oFF
to return to the idle mode.
oFF/
voLUmE on the
16
PHONE
10:30
The screen displays the
elapsed time as you
talk (in hours, minutes
and seconds).
or
CLEAR
0:01:30
888-722-7702
11/20
PM
888-722-7702
RINGER MUTED