Temporary Tone Dialing; Chain Dialing - AT&T EL52200 User Manual

Telephone operation
Options while on calls

Temporary tone dialing

If you have dial-pulse (rotary) dialing service only, you can temporarily switch
from dial-pulse to touch-tone dialing during a call.
1. During a call, press TonE . Buttons pressed after this
send touch-tone signals.
2. Use the dial pad keys to enter the number.
3. The telephone automatically returns to pulse dial mode
after you end the call.

Chain dialing

While on a call, you can initiate a dialing sequence from numbers stored
in the directory, caller ID history or redial list. Doing this can be useful if
you need to access numbers other than telephone numbers (such as bank
account numbers or access codes).
To access the directory while on a call:
Press mEnU/
1.
2. Press or
DIR
/SELECT.
mEnU
3. Press or
DIR
(0-9) to find the desired entry (see To search by name
on page 29).
4. Press /SELECT. The telephone automatically dials
mEnU
the displayed number.
To access the caller ID log while on a call:
1. Press mEnU/
2. Press or
DIR
/SELECT.
mEnU
3. Press or
DIR
necessary to view the dialing options, press #. See
To view the dialing options on page 36 for more
details).
/SELECT. The telephone automatically dials
4. Press
mEnU
the displayed number.
.
SELECT
to scroll to >DIRECToRy, then press
CID
to scroll or press the dial pad keys
CID
.
SELECT
to scroll to >CALL LoG, then press
CID
to scroll to the desired entry (if
CID
21
PHONE 0:01:30
888-722-7702
10:30 11/20
PM
>DIRECTORY
CALL LOG
Charlie Johnson
888-883-2445
ROBERT BROWN
800-360-4121
8:30 11/20
PM