Key Tone; Set Date/Time - AT&T EL52200 User Manual

Telephone settings
Handset settings

Key tone

The handset is programmed to beep with each key press. You can turn the
KEy TonE off, so there are no beeps when you press keys.
Press mEnU/
1.
2. Press or
DIR
/SELECT.
mEnU
3. Press or
DIR
/SELECT.
mEnU
4. Press or
DIR
/SELECT to save your preference.
5. Press
mEnU

Set date/time

The answering system announces the day of the week and time of each
message received prior to playing it. If you subscribe to caller ID service,
the day, month and time are set automatically with each incoming call (see
About caller ID on page 33). However, the year must be set so that the day
of the week can be calculated from the caller ID information.
Follow the steps, as mentioned below, to set the month, date, year and time.
1. Follow Steps 1 and 2 in Key tone on this page.
2. Press or
DIR
3. Use the dial pad keys (0-9) to enter the two-digit number
(01-12) for the month.
4. Use the dial pad keys (0-9) to enter the two-digit number
(01-31) for the day.
5. Use the dial pad keys (0-9) to enter the two-digit number
(00-99) for the year. Press
6. Use the dial pad keys (0-9) to enter the two-digit number
(01-12) for the hour.
7. Use the dial pad keys (0-9) to enter the two-digit number
(00-59) for the minute.
8. Press or
DIR
There is a confirmation tone.
in idle mode to enter the main menu.
SELECT
to scroll to >SETTInGS, then press
CID
to scroll to >KEy TonE, then press
CID
to select on or oFF.
CID
to scroll to >SET DATE/TImE, then press
CID
mEnU
to choose Am or Pm. Press
CID
/SELECT.
13
KEY TONE
>ON
mEnU
SET DATE
SET TIME
/SELECT to confirm.
mEnU
/SELECT.
11/20/09
10:30 PM