Static Ip; Pptp - Motorola BR700 User Manual
Ethernet broadband router
Hide thumbs
Also See for BR700:
- Specifications (2 pages) ,
- Troubleshooting (4 pages) ,
- Getting started (1 page)
Table of Contents
Advertisement
SECTION 2
2-18
Static IP
If you are required to use a permanent IP address for connecting to
the Internet, then select Static IP. Your ISP informs you if this is the
connection to use.
1
From Connection Mode, select Static IP.
2
In the IP Address field, enter the IP Address supplied by your
ISP.
3
In the Subnet Mask field, enter the Subnet Mask supplied by
your ISP.
4
In the Default Gateway field, enter the values supplied by your
ISP.
5
In the Primary DNS field, enter the values supplied by your ISP. If
necessary, enter secondary or tertiary DNS values into the
Secondary or Third DNS fields.
6
Click Apply to save the setting, or, if you wish to start over, click
Cancel.
PPTP
Point to Point Tunneling Protocol (PPTP) is a service commonly
found in Europe.
1
From Connection Mode, select PPTP.
2
In the PPP User Name field, enter the PPP User Name supplied
by your ISP.
3
In the PPP Password field, enter the PPP Password supplied by
your ISP.
4
In the PPTP Client IP field, enter the PPTP Client IP address
supplied by your ISP.
5
In the PPTP Server IP field, enter the PPTP Server IP address
supplied by your ISP.
6
Click Apply to save the setting, or, if you wish to start over, click
Cancel.
SECTION 2, INSTALLATION
INSTALLATION
Advertisement
Table of Contents
