Pairing The Bluetooth Adapter And Bluetooth Wireless Technology Device; Listening To Music Contents Of A Bluetooth Wireless Technology Device With Your System - Pioneer SC-LX73 Operating Instructions Manual

05 Basic playback
wireless technology, you can listen to music on a device
not equipped with Bluetooth wireless technology. The AS-
BT100 model supports SCMS-T contents protection, so
music can also be enjoyed on devices equipped with
SCMS-T type Bluetooth wireless technology.
Remote control operation
The remote control supplied with this unit allows you to
play and stop media, and perform other operations.
Pairing the Bluetooth ADAPTER and Bluetooth
wireless technology device
"Pairing" must be done before you start playback of
Bluetooth wireless technology content using the Bluetooth
ADAPTER. Make sure to perform pairing the first time you
operate the system or any time pairing data is cleared. The
pairing step is necessary to register the Bluetooth wireless
technology device to enable Bluetooth communications.
For more details, see also the operating instructions of
your Bluetooth wireless technology device.
1 Set the remote control to the receiver operation
mode, then press HOME MENU.
2 Select 'System Setup', then press ENTER.
3 Select 'Other Setup', then press ENTER.
4 Select 'Pairing Bluetooth Device', then press ENTER.
5 Select the 'Passcode' setting you want.
Select the same passcode as the Bluetooth wireless
technology device you wish to connect.
• 0000/1234/8888 – Select the passcode from these
options. These are the passcodes that can be used in
most cases.
• Others – Select to use a passcode other than those
mentioned above.
6 If you selected Others in step 5, enter the passcode.
Use / to select a number and / to move the cursor.
7 Follow the instructions displayed on the GUI screen
to conduct pairing with the
technology device.
Switch on the Bluetooth wireless technology device that
you want to make pair, place it near the receiver and set
it to the pairing mode.
8 Check to see that the Bluetooth ADAPTER is
detected by the Bluetooth wireless technology device.
When the Bluetooth wireless technology device is
connected:
Note
1 • It must be necessary that the Bluetooth wireless technology enabled device supports AVRCP profiles.
• Remote control operations cannot be guaranteed for all Bluetooth wireless technology enabled devices.
2 • Pairing is required when you first use the Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both your system and Bluetooth wireless technology device.
3 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
4 The passcode may in some cases be referred to as PASSKEY or PIN code.
5 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER PORT input is selected.
6 • Bluetooth wireless technology device should be compatible with AVRCP profile.
• Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in the remote control buttons.
54
En
1
2
Bluetooth
wireless
CONNECTED appears in the receiver display.
When the Bluetooth wireless technology device is not
connected:
Go back to the passcode setting in step 5. In this case,
perform the connection operation from the Bluetooth
wireless technology device.
9 From the Bluetooth wireless technology device list,
select Bluetooth ADAPTER and enter the Passcode
4
selected in step 5.
Listening to music contents of a Bluetooth
wireless technology device with your system
1 SC-LX83 only: Set the remote control operation
selector switch to SOURCE.
2 Press ADAPTER on the remote control to switch the
receiver to ADAPTER PORT input.
3 From the Bluetooth wireless technology device,
perform the operation to connect to the Bluetooth
ADAPTER.
4 Start playback of music contents stored on the
Bluetooth wireless technology device.
This receiver's remote control buttons can be used for
basic playback of files stored on Bluetooth wireless
6
technology devices.
SC-LX83:
SOURCE
TV RECEIVER
CH VOL
VOL
SC-LX73:
DIRECT STEREO
HDD DVD
THX PHASE CTRL
TV / DTV MPX
HDMI OUT
1 2
®
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Pioneer Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
5 While listening to a source, set the remote control
to the receiver operation mode, then press STEREO
repeatedly to select SOUND RETRIEVER AIR.
3
5
STATUS PHASE CTRL CH LEVEL
THX MPX PQLS MEMORY
AUTO/ALC/
STANDARD ADV SURR
DIRECT STEREO
PGM MENU
STANDARD ADV SURR
STATUS
PQLS
AUDIO
3