Connecting Optional Bluetooth; Adapter; Pairing Bluetooth Adapter And Bluetooth Wireless Technology Device - Pioneer VSX-520-S Operating Instructions Manual

Other connections

Connecting Optional Bluetooth

ADAPTER

• Before making or changing connections,
switch off the power.
SUBWOOFER
PRE OUT
SURR BACK /
FRONT
BD
HEIGHT
L
( Single )
R
PRE OUT
DVD
L
IN
COAXIAL ASSIGNABLE
TV/SAT
IN 1
R
( CD )
TV/SAT
OPTICAL
IN IN 2
L
( DVR/VCR )
OUT
IN
IN 1
R
( CD-R/TAPE )
ASSIGNABLE
HDMI 1 2
This receiver
1 Switch the receiver into standby and
Bluetooth
connect ADAPTER to the ADAPTER
PORT located in the rear panel.
2 Switch on the receiver.
3 Press ADAPTER on the remote control to
switch the receiver to ADAPTER input mode.
Pairing Bluetooth ADAPTER and
Bluetooth wireless technology
device
"Pairing" must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
"Pairing" is the step necessary to register
Note
1 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER input
mode is selected.
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology
device.
3 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
CD-R/TAPE DVR/VCR
ADAPTER PORT
( OUTPUT 5 V 100 mA MAX )
VIDEO
DVR/VCR
OUT
OUT
CD CD-R/TAPE DVR/VCR
IN
MONITOR OUT
P
ANTENNA R
FM
UNBAL
DVD BD
75
IN
AM
LOOP
AUDIO COMPONENT VID
®
Bluetooth ADAPTER
Bluetooth wireless technology device to
enable Bluetooth communications.
details, see also the operating instructions of
your Bluetooth wireless technology device.
1 Press TOP MENU.
2 Press ENTER to enter PAIRING.
3 Select the PIN code to be used from 0000/
1234/8888 using /, then press ENTER.
IN
PAIRING blinks.
DVD
P
B
Important
• You can use any of 0000/1234/8888 PIN
codes. Bluetooth wireless technology
device using any other PIN code cannot
be used with this system.
4 Switch on the Bluetooth wireless
technology device that you want to make
pairing, place it near the system and set it
into the pairing mode.
5 Check to see that the Bluetooth ADAPTER
is detected by the Bluetooth wireless
technology device.
When Bluetooth wireless technology device is
1
connected:
Bluetooth wireless technology device name
appears in the receiver display.
When Bluetooth wireless technology device is
not connected:
NODEVICE appears in the receiver display. In
this case, perform the connection operation
from the side of the Bluetooth wireless
technology device.
09
2
For more
3
49
En