Connecting Optional Bluetooth; Adapter; Pairing Bluetooth Adapter And Bluetooth Wireless Technology Device - Pioneer VSX-520-K Operating Instructions Manual

08 Other connections

Connecting Optional Bluetooth

ADAPTER

• Before making or changing connections,
switch off the power.
BD
DVD
COAXIAL ASSIGNABLE
TV/SAT
IN 1
( CD )
OPTICAL
IN
IN 2
( DVR/VCR )
OUT
IN 1
( CD-R/TAPE )
ASSIGNABLE
HDMI
This receiver
1 Switch the receiver into standby and
Bluetooth
connect
PORT located in the rear panel.
2 Switch on the receiver.
3 Press ADAPTER on the remote control to
switch the receiver to ADAPTER input.
Pairing Bluetooth ADAPTER and
Bluetooth wireless technology device
"Pairing" must be done before you start
playback of Bluetooth wireless technology
content using Bluetooth ADAPTER. Make sure
to perform pairing first time you operate the
system or any time pairing data is cleared.
"Pairing" is the step necessary to register
Bluetooth wireless technology device to enable
Bluetooth communications.
see also the operating instructions of your
Bluetooth wireless technology device.
Note
1 When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, NO ADAPTER will be displayed if ADAPTER input is
selected.
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth ADAPTER.
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device.
3 The system can display alphanumeric characters only. Other characters may not be displayed correctly.
4 PIN code may in some case be referred to as PASSKEY.
44
En
SUBWOOFER
PRE OUT
CD-R/TAPE DVR/VCR
ADAPTER PORT
SURR BACK /
FRONT ( OUTPUT 5 V
HEIGHT
L
( Single )
OUT
R
PRE OUT
CD CD-R/TAPE DVR/VCR
L
IN IN
ANTENNA
R
FM
UNBAL
DVD BD
TV/SAT 75
L
IN IN
AM
LOOP
R
1 2
AUDIO
®
Bluetooth ADAPTER
ADAPTER to the ADAPTER
2
For more details,
1 Press TOP MENU.
2 Press ENTER to enter PAIRING.
3 Select the PIN code to be used from 0000/
1234/8888 using /, then press ENTER.
PAIRING blinks.
100 mA MAX )
Important
VIDEO
DVR/VCR
OUT IN
• You can use any of 0000/1234/8888 PIN
codes. Bluetooth wireless technology
device using any other PIN code cannot be
MONITOR OUT DVD
P P
R B
used with this system.
4 Switch on the Bluetooth wireless
technology device that you want to make
pairing, place it near the system and set it
COMPONENT VID
into the pairing mode.
5 Check to see that the Bluetooth ADAPTER
is detected by the Bluetooth wireless
technology device.
When Bluetooth wireless technology device is
connected:
Bluetooth wireless technology device name
appears in the receiver display.
When Bluetooth wireless technology device is
1
not connected:
NODEVICE appears in the receiver display. In
this case, perform the connection operation
from the side of the Bluetooth wireless
technology device.
6 From the Bluetooth wireless technology
device list, select Bluetooth ADAPTER and
enter the PIN code selected in the step 4.
3
4