Display - Pioneer SC-LX73 Operating Instructions Manual

Controls and displays
HDMI OUT – Switch the HDMI output terminal
(page 76).
SIGNAL SEL – Use to select an input signal (page 58).
MCACC – Press to switch between MCACC presets
(page 58).
SLEEP – Use to put the receiver in sleep mode and
select the amount of time before sleep (page 76).
CH LEVEL – Press repeatedly to select a channel,
then use / to adjust the level (page 111).
A.ATT – Attenuates (lowers) the level of an analog
input signal to prevent distortion (page 75).
DIMMER – Dims or brightens the display (page 76).
9 MULTI-ZONE select buttons
Switch to perform operations in ZONE 2 and ZONE 3
(page 75).
10 Remote control LED
Lights when a command is sent from the remote control.

Display

1 2
AUTO
L C
PCM
SL
HDMI
XL XC
DIGITAL
ANALOG
LFE
AUTO SURROUND
STREAM DIRECT
2
PROLOGIC x Neo:6
THX ADV.SURROUND
STEREO STANDARD
SP AB SLEEP
6
15 16 17
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 58).
2 Program format indicators
Light to indicate the channels to which digital signals are
being input.
L/R – Left front/Right front channel
C – Center channel
SL/SR – Left surround/Right surround channel
LFE – Low frequency effects channel (the (( )) indicators light
when an LFE signal is being input)
XL/XR – Two channels other than the ones above
XC – Either one channel other than the ones above, the mono
surround channel or matrix encode flag
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected.
2 DIGITAL – Lights with Dolby Digital decoding.
2 DIGITAL PLUS – Lights with Dolby Digital Plus
decoding.
2 TrueHD – Lights with Dolby TrueHD decoding.
3
2
DIGITAL PLUS DSD
R
2
TrueHD WMA9Pro MULTI-ZONE
SR
DTS HD ES 96/24
S.RTRV SOUND
XR
CD TUNER
MSTR
CD-R PHONO iPod
18
11 RECEIVER
Switches the remote to control the receiver (used to
select the white commands).
Switch to perform operations in the main zone.
Also use this button to set up surround sound.
12 MASTER VOLUME +/–
Use to set the listening volume.
13 MUTE
Mutes the sound or restores the sound if it has been
muted (adjusting the volume also restores the sound).
14 LIGHT
Press to turn on/off the illumination for the buttons. The
way the buttons light can be selected from four modes
(page 94).
4 5 6 7 8 9
PCM FULL BAND TUNED
PQLS ALC ATT STEREO
OVER MONO
UP MIX
TV
DVD VIDEO
BD DVR HDMI
19
DTS – Lights with DTS decoding.
DTS HD – Lights with DTS-HD decoding.
96/24 – Lights with DTS 96/24 decoding.
WMA9 Pro – Lights to indicate that a WMA9 Pro
signal is being decoded.
DSD PCM – Light during DSD (Direct Stream Digital)
to PCM conversion with SACDs.
PCM – Lights during playback of PCM signals.
MSTR – Lights during playback of DTS-HD Master
Audio signals.
4 MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 74).
5 FULL BAND
SC-LX83 only: Lights when the Full Band Phase Control is
switched on (page 59).
6 Listening mode indicators
AUTO SURROUND – Lights when the Auto Surround
feature is switched on (page 55).
ALC – Lights when the ALC (Auto level control) mode
is selected (page 58).
10 11 12 13 14
dB
HMG USB
[ 2 ] [ 3 ] [ 4 ]
20
02
15
En