Installation
Install the telephone base, as shown below. If you subscribe to high-speed Internet service
(DSL - digital subscriber line) through your telephone line, you must install a DSL filter on
the DSL line. If you want to mount your telephone on a wall, use the included wall-mount
bracket and refer to Wall-mount installation in the online user's manual for details.
Electrical outlet not
controlled by a wall
switch
Plug the large end
of the base power
adapter into an
electrical outlet not
controlled by a wall
switch.
Plug the small
end of the larger
power adapter into
the power jack on
the bottom of the
telephone base.
ImPorTanT InformaTIon:
Use only the power adapter provided with this product. To obtain a replacement, visit our website
www.telephones.att.com
at
1 (866) 288-4268
or call
.
Telephone
line cord
1 (800) 222-3111
3
Telephone wall jack
Plug the other end of the
telephone line cord into a
telephone wall jack.
A DSL filter (not included) is
required if you have DSL high-
speed Internet service. The
DSL filter must be plugged
into the telephone wall jack.
Route the cords
through the slots.
Plug one end of the
telephone line cord
into the TEL. LInE
jack on the bottom
of the telephone
base.
. In Canada, dial