Options While On A Call - AT&T EL52100 Quick Start Manual

options while on a call

volume control
While on a call, press
/voLUmE to decrease the listening volume.
CID
note: The handset earpiece volume setting (1-5) and speakerphone
volume setting (1-6) are independent. Changing one does not affect
the other.
Chain dialing
While on a call, you can initiate a dialing sequence from numbers stored in the directory,
caller ID history or redial list. Doing this can be useful if you wish to access other
numbers (such as bank account numbers or access codes) from the directory, caller ID
history or redial list.
To dial a number from the directory, caller ID history or redial list while on a call, access
the number through the menu system:
While on a call, to show the directory or caller ID history, press mEnU/
1.
to >DIrECTorY or >CaLL Log. Press
-or-
While on a call, press rEDIaL/
2. Scroll to the desired number or press the dialing keys to find the desired directory
entry (see To search by name in the online user's manual for more options).
3. Press /SELECT. The selected number is dialed.
mEnU
redial
The handset stores the 20 most recently called numbers in the redial list.
To review and call numbers in the redial list, press rEDIaL/
1.
most recently called number appears on the screen.
2. If it is not the desired number, press
the list.
3. Once the desired number appears, press
number. Press
/voLUmE to increase or press
DIr
PaUSE
off/ to exit the redial list.
CLEar
/SELECT.
mEnU
to show the redial list.
DIr or CID to scroll through the numbers in
PHonE/
fLaSH
11
SELECT
in idle mode. The
PaUSE
or SPEaKEr to dial the
, scroll