Resetting The Appliance To The Factory Settings; Information On The Appliance Status - Melitta Caffeo Varianza CSP Operating Instructions Manual

Changing basic settings
3. Use the arrow buttons to select the desired setting and confirm with
"menu/ok".
4. Exit the menu with the Exit command.
» The ready symbol appears on the display.
8.5

Resetting the appliance to the factory settings

The appliance can be reset to the factory settings.
Information
If the appliance is reset to the factory settings, all personal settings are lost.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the System > Factory settings menu.
3. Use the arrow buttons to select Reset and confirm with "menu/ok".
» The ready symbol appears on the display.
8.6

Information on the appliance status

Information on the appliance status can be accessed via the System > Statis-
tics menu. Press the "menu/ok" button to exit the menu.
The following table provides an overview of the meaning of the informa-
tion.
Information
Beverages
Descaled
Coffee system cleaned
Milk system cleaned
Filter changed
The progress bars show the number of beverages that can still be pre-
pared until the appliance requests you to perform cleaning, descaling or to
change the filter.
Software version
Information on the installed software version is obtained via the
System > SW Version menu. Press the "menu/ok" button to exit the menu.
34
Meaning
Number of beverages prepared since starting up.
Number of descaling processes performed.
Number of cleaning processes performed.
Number of cleaning processes performed.
Number of filter changes performed