Melitta Caffeo Varianza CSP Operating Instructions Manual page 23

Using the My Bean Select® function
MY BEAN SELECT
Fill in single portion
Fig. 15: Filling with coffee beans for the My Bean Select® function
1. Remove the measuring spoon (2) from the bean chute (36).
» The My Bean Select message appears on the display with the requests
Fill with single portion of beans, put back the spoon.
2. Use the measuring spoon to fill a single portion of coffee beans into the
bean chute (36).
3. Place the measuring spoon back onto the bean chute.
» The My Bean Select ready symbol with the Select beverage request
appear on the display.
4. Prepare any coffee beverage.
Information
The measuring spoon is intended to help in filling the correct amount of
coffee beans into the bean chute.
A full measuring spoon contains approx. 10 to 11 g of coffee beans.
ƒ
Depending on the desired coffee strength, fewer coffee beans can also
be filled.
If there are less than approx. 8 g coffee beans in the bean chute, the My
ƒ
Bean Select® function is not activated. The My Bean Select ready symbol
does not appear on the display. The next time a coffee is dispensed, the
coffee beans from the bean chute are mixed with the coffee beans from
the bean container.
24
Mount spoon