Table of Contents
Advertisement
9
Fig. 5:
ON/OFF button
Requirement: The appliance has been installed and connected.
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.
»
The welcome display appears on the appliance.
»
The request to carry out the setup appears: Please set up the machine.
3. Confirm with "menu/ok".
»
The Language menu appears.
4. Select your language with the arrow buttons. Confirm with "menu/ok".
»
The Water hardness menu appears.
5. Select the determined water hardness range with the arrow buttons or
confirm the default value with "menu/ok".
»
The request Please refill and insert water tank appears.
6. Remove the water tank. Rinse the water tank out with clean water. Fill
the water tank with fresh water and insert it.
»
The appliance heats up and performs automatic rinsing.
»
The ready symbol appears on the display.
7. Fill coffee beans into the bean container. To do this, read section 4.4
Filling coffee beans into the bean container on page 17.
»
As required, a water filter can now be inserted (see section 9.9 Using a
water filter on page 42).
First steps
13
- Quick Links:
- Problems
Hide quick links:
Advertisement
Table of Contents
