Basic Operation; Switching The Appliance On And Off - Melitta Caffeo Varianza CSP Operating Instructions Manual

Basic operation

4 Basic operation
This chapter describes basic operating steps for using the appliance on a
daily basis.
4.1

Switching the appliance on and off

Before switching on after starting up the appliance for the first time, read
section 3.5 Switching on the appliance for the first time on page 12.
Information
ū When switched on and off, the appliance performs automatic rinsing.
ū During rinsing, rinsing water is also conducted into the drip tray.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button (9).
» The welcome display appears on the appliance.
» The appliance heats up and performs automatic rinsing.
» The ready symbol appears on the display.
Information
If the appliance was only switched off briefly, there is no automatic rinsing
after switching on.
Switching off the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button (9).
» The appliance performs automatic rinsing.
» The appliance switches off.
Information
ū The appliance switches off automatically when it is not operated for a
long time. Automatic rinsing is also carried out in this case.
ū The off time can be set in the Auto OFF menu, see section 8.2 Setting
Auto OFF on page 32.
ū If no beverage has been prepared since switching on or if the water tank
is empty, no rinsing takes place.
14