Relay Configuration; Securrelay Mode - Secura Key ENTRACOMP 26SA User & Installation Manual

RELAY CONFIGURATION. The solid-state relay can be set to be
Normally Closed, Normally Open or to operate with the SecuRelay
for increased vandal resistance.
Selections are:
6. Normally Open (Factory default)
7. Normally Closed
8. SecuRelay™ Option.
The default mode is Normally Open (NO). To place the relay in the
Normally Open (NO) mode, place the "
followed by the "6" card.
To place the relay in the Normally Closed (NC) mode, place the "
on the reader twice, followed by the "7" card.
To place the unit in the SecuRelay
reader twice, followed by the "8" card.
To return to normal mode, place the "
followed by the "1" card.
* *
+
* *
+
TM
* *
+
* + *
Secura Key • 10
*
" card on the reader twice,
+
6
+
7
mode, place the "
+ 8
*
" card on the reader twice
+
1
TM
*
"card
*
" card on the