Manual Setup - Marantz SR7009 Owner's Manual

Contents Connections

Manual Setup

Perform when setting the speakers manually or when changing settings
made in Audyssey ® Setup.
If you change the speaker settings after performing Audyssey
0
you will no longer be able to select Audyssey MultEQ
Dynamic EQ or Audyssey Dynamic Volume
®
This unit can be used without changing "Manual Setup" settings. Please
0
set if necessary.
Front panel Display
Playback
Setup,
®
XT32, Audyssey
®
. (v p. 196 - 198)
®
Rear panel 230
Settings
Amp Assign
Select the power amplifier usage method to match your speaker system.
o Assign Mode
Select how to use the power amp.
You need to configure the detailed settings for the speaker
configuration in accordance with the selected mode. Select Assign
Mode configure the corresponding detailed settings.
Setting to use the 9-channel power amplifier in this unit
0
and an external power amplifier connected to PRE OUT to
play back up to 11.1 channels.
You can connect speakers for up to 13.1 channels for
0
11.1ch:
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 11.1-channels in accordance with the
input signal and sound mode. (v p. 233)
Settings to assign all power amplifier within this unit to
0
MAIN ZONE to play back up to 9.1 channels.
You can connect speakers for up to 11.1 channels for
0
9.1ch: MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 9.1-channels in accordance with the input
signal and sound mode. (v p. 237)
Remote
Tips Appendix
Index