Contents
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey® Setup.
• If you change the speaker settings after performing Audyssey® Setup, it
will not be possible to select Audyssey MultEQ® XT, Audyssey Dynamic
EQ® and Audyssey Dynamic Volume® (vpage 150, 151).
• "Manual Setup" can be used without changing the settings. Please set
if necessary.
Front panel
Display
Connections
Playback
Rear panel
Settings
Amp Assign
Select power amplifier usage method to match your speaker system.
2 Assign Mode
Set the assignment mode.
Main Only (Default) : Setting for 7.1-channel playback using surround
back, front height, or front wide speakers.
ZONE2 : Setting to assign the unit's built-in power amplifier for ZONE2
and output the audio in stereo.
Bi-Amp : Setting to use the front speakers via the bi-amp connection.
Front B : Setting to use the second set of front speakers for playback.
You can switch the speaker to be used as the "Front
Speaker" (vpage 178) between Front speaker A and B.
2 Main Speakers
Selects speakers used in MAIN ZONE.
Front Height (Default) : Uses front height speakers.
Front Wide : Uses front wide speakers.
173
Remote
Tips
Appendix
Index