Playing A Bluetooth Device - Marantz SR7009 Owner's Manual

Contents Connections

Playing a Bluetooth device

Check the following before you play back music.
The Bluetooth function of the Bluetooth device must be turned on
0
Pairing must be completed
0
1
Press Bluetooth to switch the input source to
"Bluetooth".
The unit will automatically connect to the most recently used
Bluetooth device.
2
Start playing the Bluetooth device.
The Bluetooth device can also be operated with the remote
0
control of this unit.
Front panel Display
Playback Settings
Operation buttons
1
3
2
8 9
6 7
ENTER
u i
0 When the power of this unit is turned on, the input source will be automatically
switched to "Bluetooth" if a Bluetooth device is connected.
0 When the "IP Control" setting of this unit is set to "Always On" and a Bluetooth
device is connected with the unit in the standby state, the power of the unit will be
turned on automatically. (v p. 263)
0 Press STATUS on this unit during playback to switch the display between Title
name, Artist name, Album name, etc.
0 English letters, numbers and certain symbols are displayed. Incompatible
characters are displayed as "." (period).
Rear panel 98
Tips
Playback
Pause
Stop
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-forward
Playback / Pause
(Press and hold) Stop
Skip to previous track / Skip to next track
(Press and hold) Fast-reverse / Fast-forward
Remote Index
Appendix
Function