The Menu Screen Is Not Displayed On The Tv - Marantz SR7009 Owner's Manual

Contents Connections
o The menu screen is not displayed on the TV
Symptom
The menu screen or status
0
information screen is not
displayed on the TV.
0
0
0
0
Front panel Display
Playback
The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is
connected to a TV using a different video output connector, operate while watching the display on this
unit.
The status information will not appear on the TV when the following video signals are being played.
- Some images of 3D video content
- Computer resolution images (example: VGA)
- Video with an aspect ratio other than 16:9 or 4:3
When a 2D video is converted to a 3D video on the TV, the menu screen or status information screen is
not displayed properly.
In the pure direct playback mode, the menu screen or status information is not displayed. Switch to a
sound mode other than the pure direct mode.
Set the "TV Format" setting in the menu to a selection that is appropriate for the TV.
Rear panel
Settings
Cause / Solution
302 Remote
Tips Appendix
Page
Index
－
150
150
150
214