Menu Map - Marantz SR7009 Owner's Manual

Contents Connections

Menu map

When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items
Dialog Level Adjust
Subwoofer Level Adjust
Surround Parameter
.
Audio M-DAX
Audio Delay
Volume
Audyssey
Graphic EQ
Picture Adjust
HDMI Setup
Output Settings
.
Component Video Out
Video
On Screen Display
TV Format
Front panel Display
Playback
This setting adjusts the output level to clarify the dialogue output from the center
channel.
This setting adjusts the volume level for the subwoofer.
Adjusts surround sound parameters.
Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
Compensates for incorrect timing between video and audio.
Sets the MAIN ZONE (room where the unit is located) volume setting.
Set Audyssey MultEQ ® XT32, Audyssey Dynamic EQ
Audyssey LFC TM and Audyssey DSX
Uses the graphic equalizer to adjust the tone of each speaker.
Adjusts picture quality.
Makes settings for HDMI video/audio output.
Makes settings for video output.
Sets whether to use the component video output connector for MAIN ZONE or ZONE2.
Configures the on-screen display settings.
Sets the video signal format to be output for the TV you are using.
Rear panel 183
Settings Settings Tips
Description
® , Audyssey Dynamic Volume
® .
Remote Index
Appendix
Page
189
189
190
194
195
195
196
® ,
200
202
204
208
212
213
214