Contents
Connections
Manual Setup
Perform when setting the speakers manually or when changing settings
made in Audyssey
®
Setup.
If you change the speaker settings after performing Audyssey
0
you will no longer be able to select Audyssey MultEQ
Dynamic EQ
or Audyssey Dynamic Volume
®
This unit can be used without changing "Manual Setup" settings. Please
0
set if necessary.
Front panel
Display
Playback
Setup,
®
XT, Audyssey
®
. (v p. 158 – 159)
®
Rear panel
189
Settings
Amp Assign
Select power amplifier usage method to match your speaker system.
See "Speaker configuration and "Amp Assign" settings" (v p. 34)
regarding the speaker configuration and connection.
o Assign Mode
Select how to use the power amp.
Main Only
(Default):
ZONE2:
Bi-Amp:
Front B:
o Main Speakers
Select the speakers used in MAIN ZONE.
Front Height
(Default):
Front Wide:
Remote
Tips
Appendix
Setting for 7.1-channel playback using
surround back, front height or front wide
speakers.
Setting to assign the unit's built-in power
amplifier for ZONE2 and output the audio
in stereo.
Setting to use the front speakers via the
bi-amp connection.
Setting for playback using a second front
speaker. You can switch the playback
between front speaker A and B according
to your liking. Switch the front speaker
using "Front Speaker" in the menu.
(v p. 196)
Select when the front height speakers are
connected.
Select when the front wide speakers are
connected.
Index