Figure 58. Reinstalling the computer cover (for M700z)
Figure 59. Reinstalling the computer cover (for M800z)
4. Install the computer stand. See "Replacing the computer stand" on page 60.
5. Place the computer in an upright position.
6. If a locking device is available, use it to lock the computer. See "Locking your computer" on page 35.
7. Reconnect the external cables and power cords to the corresponding connectors on the computer.
See "Hardware locations" on page 1.
8. Update your configuration. See "Using the Setup Utility program" on page 41.
9. If a newly installed hardware component does not work normally, update the device driver. See
"Keeping your computer current" on page 32.
.
Chapter 7
Installing or replacing hardware
83