Lenovo ThinkCentre M700z User Manual page 88

9. Lift the serial connector module to remove it from the system board.
Figure 49. Removing the serial connector module
10. Position the new serial connector module on the system board, so that the screw holes in the serial
connector module align with the corresponding mounting studs on the system board.
Figure 50. Installing the serial connector module
11. Install the two screws
Figure 51. Installing the serial connector module screws
12. Connect the serial connector module cable to the serial connector module.
13. Install the system-board shield. See "Replacing the system-board shield" on page 66.
78
ThinkCentre M700z and M800z User Guide
1
to secure the serial connector module on the system board.