Replacement And Adjustment; Exterior Cover; Top Cover And Sensor Cover - Ricoh G157 Service Manual

1. REPLACEMENT AND ADJUSTMENT


CAUTION
Turn off the main switch and disconnect all cabling, including the A.C. from
the printer before removing any parts.
Keys:
: See or refer to
 : Clip ring

1.1 EXTERIOR COVER

1.1.1 TOP COVER AND SENSOR COVER

CAUTION: When you reassemble, attach the top cover before you insert and close
the paper tray. The link lever (
the top cover after you insert and close the paper tray.
1. Remove the printer from the paper
tray unit.
2. Paper tray [A]
NOTE: The paper feed side of the
paper tray contacts the link
lever of the paper end
sensor feeler (
3. Ground plate [B] ( x 1)
4. Top cover [C] ( x 4)
5. Sensor cover [D]
SM
 : Screw  : Connector
 : E ring
2.4.2) can be damaged if you attach
[C]
2.4.1).
[A]
1
EXTERIOR COVER
[B]
[D]
G389R901.WMF
G389R902.WMF
G389