Wsw33 (Function Setting 11) - Ricoh G157 Service Manual

WSW33 (Function setting 11)

Selector
No.
Detection threshold level of "no
1–3
tone" during recording of ICM
FAX receiving speed to be kept
4, 5
within the transmission speed
limit to the PC
Report output of polled
6
transmission requests
7, 8 Comfortable noise level
NOTE: Selectors 1 through 3 are applicable to models equipped with internal
TADs.
Selectors 1 through 3: Detection threshold level of "no tone" during recording of
ICM
If the tone level during recording of ICM is less than the threshold setting made by
these selectors, the tone is interpreted as "no tone". When the "no tone" state is
kept for the period specified by selectors 1 through 5 on WSW21, the machine
disconnects the line.
Selectors 4 and 5: FAX receiving speed to be kept within the transmission speed limit
to the PC
To transmit FAX data being received from other machine to the connected PC, you
may need to keep the FAX receiving speed within the transmission speed limit
specified for the PC. In an initial negotiation sequence for transmission, the
machine responds to the calling station with the allowable FAX receiving speed
specified by these selectors.
Selectors 7 and 8: Comfortable noise level (Not used.)
These selectors set the level of noise to be added during playing-back of voice
signals recorded with no-signal compression.
If they are set to "0, 0", no noise will be added.
SM
Function
No. 1. 2. 3.
No. 4. 5.
(Not used.)
5-75
MAINTENANCE MODE
Setting and Specifications
0 0 0: -42.5 dBm
0 0 1: -44.0 dBm
0 1 0: -45.5 dBm
0 1 1: -47.0 dBm
1 0 0: -48.5 dBm
1 0 1: -50.0 dBm
1 1 0: -51.5 dBm
1 1 1: -53.0 dBm
0 0: 14400 bps
0 1: 12000 bps
1 0: 9600 bps
1 1: 7200 bps
0: Yes 1: No
G157