Bowflex TC5300 Service Manual page 23

8-8 Ease new motor belt onto drive pulley and flywheel.
8-9 Once belt is tightly attached, re-tension the belt
by tightening tension bolt with a 1/2 inch wrench,
replace left cast cover, hardware plug, rear step,
rear plastic cover, and rear step plastic cover.
8-10 Recalibrate machine according to Appendix 3.
Figure 5:
Motor Pan Bolt
Figure 7:
Drive Pulley
mechanical service guide
Figure 4:
Figure 6:
Motor Pan
Bolt
Bowflex TreadClimber
®

Service Manual
®