Bowflex TC5300 Service Manual page 17

5-7 Remove wire from right upright by pulling from
the bottom.
5-8 Thread new wire through right upright. Making
sure the cable exits through the lower slotted
hole in the upright.
5-9 Re-attach cable connector at base of right
upright.
5-10 Attach cable connector from console to the
cable connector from the right upright.
5-11 With the help of another person, lift the console
back onto both uprights, ensuring that junction
covers are in place.
uSE CAuTIoN WHEN CoNNECTING THE WIRING
HARNESS To ENSuRE THAT THE WIRES Do NoT
BECoME PINCHED oR CoME INTo CoNTACT
WITH ANY MovING PART. THE TREADCLIMBER
FITNESS MACHINE WILL NoT WoRK AND AN
ELECTRIC SHoCK HAzARD MAY BE PRESENT IF
THE WIRES BECoME PINCHED.
5-12 Re-attach both uprights to console using 4
button head bolts on each side.
5-13 Re-attach the right and left upper upright
plastics as well as the right lower upright plastic
cover.
5-14 Recalibrate machine according to Appendix 3.
mechanical service guide
Figure 4:
Figure 5:
®
Figure 6:
Bowflex TreadClimber
® ®

Service Manual