Power On - Olympus E-3 Instruction Manual

Power on

1
Set the camera's power switch to ON
• To turn off the power, set the power switch to OFF.
LIGHT button
Turns the control panel light on and off.
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned on. Ultrasonic
vibrations are used to remove dust and dirt from the image pickup device's filter surface. The SSWF
(Super Sonic Wave Filter) indicator blinks while dust reduction is working.
Adjusting the viewfinder's diopter
Adjust the viewfinder's diopter in accordance
with your vision.
While looking through the viewfinder, rotate the
diopter adjustment dial little by little.
When you can see the AF target clearly,
adjustment is complete.
14
EN
SSWF indicator
Control panel
When the camera is turned on,
the battery check is displayed on
the control panel.
Lit up (ready for use)
Blinks (charging required)
Diopter adjustment dial
Power switch
Viewfinder
AF target