Enlarged Display Operation; Resetting To The Factory Default Settings - Olympus E-3 Instruction Manual

Enlarged display operation

It is possible to enlarge the subject for display. Enlarging the image during MF makes focus
confirmation and adjustment easier.
1
1
Use p to move the frame and press the i button.
• Area inside the frame is enlarged and displayed.
• Press and hold the i button to return the shifted enlargement frame to the center.
2
Turn the main dial (or sub dial) to change the magnification (5x / 7x / 10x).
• Pressing the i button cancels enlarged display operation.
TIPS
Checking the image stabilizer effect:
j Press and hold the o button. g"Checking the image stabilizer effect with live view" (P. 64)
Checking the subject on the monitor even in low light situations:
j See "LIVE VIEW BOOST" (gP. 102).
x
Notes
• If there is a high-intensity light source within the screen, the image may be displayed darker but
will be recorded normally.
• If the live view function is used over a long period, the temperature of the image pickup device
rises causing images with high ISO sensitivity to appear noisy and unevenly colored. Either
lower the ISO sensitivity or turn off the camera for some time.
• Exchanging the lens will cause live view to stop.
• The following functions are not available during live view.
C-AF / AE lock / [AEL / AFL]

Resetting to the factory default settings

Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. To reset the camera to the factory default settings, set [RESET]. You
can register settings in advance to [RESET1] and [RESET2]. The camera settings at that time
are registered in [RESET1] and [RESET2]. For details on the registered functions, refer to
"Functions that can be registered with My Mode and Custom Reset Setting" (gP. 142).
Registering [RESET1] / [RESET2]
Menu
1
Select either [RESET1] / [RESET2] to register and press d.
• If settings have already been registered, [SET] is displayed next to [RESET1] / [RESET2].
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET].
2
Select [SET] and press the i button.
32
EN
250 F5.6 250 F5.6
38 38
MENU
[W] [CUSTOM RESET]