My Mode Setup; Button Timer - Olympus E-3 Instruction Manual

MY MODE SETUP

You can store two frequently used settings as My Mode. There are two basic ways to shoot with
the registered My Mode settings.
MODE
• Use the
• Assign [MY MODE SETUP] to the < button. g"; FUNCTION" (P. 99)
To shoot with My Mode using the < button, follow the steps under "Executing" below and set
the My Mode you will use in advance.
Registering
1) Select [MY MODE1] or [MY MODE2] and press d.
2) Select [SET] and press the i button.
• The current settings are registered in the camera. For details on the functions that can be
registered to My Mode, refer to "Functions that can be registered with My Mode and Custom
Reset Setting" (gP. 142).
• To cancel the registration, select [RESET].
Executing
1) Select [MY MODE1] or [MY MODE2] and press the i button.
2) Select [YES] and press the i button.
• The selected My Mode is set.
• When shooting, press the shutter button while holding down the < button.

BUTTON TIMER

The direct button may remain selected even after it is released.
[OFF]
[3SEC] / [5SEC] / [8SEC] The button remains selected during the number of seconds
[HOLD]
• Buttons that can be set with [BUTTON TIMER]
, #, w,
ISO , F, WB
A
8
You can switch the functions of the
button will function as the < button, and the < button will function as the
the AEL / AFL
AFL button.
• The setting also applies to the < button on the optional power battery holder when attached to the
camera.
100
EN
button to make the settings. g"My Mode shooting" (P. 44)
Available only when the button is pressed.
indicated.
The button remains selected until you press it again.
MODE , G, AF ,
AEL
, < / Y / j
BKT
button and the < button. When you select [ON],
AFL
/
AEL /