Replacing the display assembly
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
Before working inside your
follow the instructions in
best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Place the display assembly on the palm-rest assembly.
2
Close the left display hinge and align the screw holes on the left display hinge
with the screw holes on the palm-rest assembly.
3
Replace the screws that secure the hinge to the palm-rest assembly.
4
Route the display cable through its routing guides on the palm-rest assembly.
5
Route the antenna cables through its routing guides on the palm-rest
assembly.
6
Close the display and turn the computer over.
Post-requisites
1
Replace the
system
2
Replace the
heat-sink
3
Replace the
IO
4
Replace the
wireless
5
Replace the
memory
6
Follow the procedure from step 3 to step 5 in "Replacing the
7
Follow the procedure from step 3 to step 7 in "Replacing the
computer. After working inside your computer,
After working inside your
board.
assembly.
board.
card.
module.
computer. For more safety
Replacing the display assembly
36
hard
drive".
base
cover".
86